primeda-telecom

High end & Super professional Portable 1x12G/3G-SDI Video /RS485/2xTally over Fiber Optic Converters, Highly recommended !   Most advantage: The device supports clock recovery, it can reduce signal jitter circuit, and process distorted signals, make a super stable signal transmission. it is much better than...

Feature: Extend PCM Voice Telephones and Network signal: 2/4 Independent telephone lines + 1 Gigabit Ethernet (100/1000 Mbit/s) port through same fiber optic cable to far end. Suitable for Both Fiber Types (Single-mode and multimode). Single-mode fiber for a long distance up to 20...

Description: The phone over fiber extenders can offer a low-cost solution for extending limited reach POTS telephone lines to fiber optical distances of over 12.4 miles using Single Mode (SM) type optical fibers and 0.31 miles using Multimode (MM) fibers. Besides extending POTS telephone...

Feature: Universal for Both Fiber Types: Same media converters can supports Single-mode fiber for a long distance up to 20 km(12miles) and Multimode fiber for a distance up to 500m(0.31miles), wavelength 1310/1550 nm Extend your POTS Phones and Network: 2/4/8 Independent telephone lines +...

Feature:  The sleeves are applied in nearly all branches optic fibers engineering. They are used to secure connections in fiber optic splice closures as well as 19" rack fiber optical distribution panels, stand and wall box. Stiffness of connection and quickness of assembly (below...

Feature:   1. This is the industry's most popular, High-quality fusion splice protection sleeve.Preshrunk configuration design. 2. It has a steel strength member, inner fiber tube, and outer shrink tube. After heat shrinking the size is 2.4mm diameter x 60mm length 3. Preshrunk configuration design, it can make...

Feature: It is designed for multiple fibers protect mass fusion splices of ribbons with one to twelve fibers. The color is clear (transparent), it make it easy to detect splice before shrinkage, Easily use and avoid any damages to the optical fiber during installation This...

Feature: It can extend Uncompressed 3G/HD-SDI Video over a fiber optic to far end. Suitable for Universal Single-mode (SM) and multi-mode (MM). SM reach up to 12.4miles (20Km), MM up to 500m. Support 3G-SDI, HD-SDI, SD-SDI, DVB-ASI video signal, Video resolution up to 1920x1080@60Hz...

Features Extends uncompressed 3G-SDI, HD-SDI or SD-SDI video over single fiber. Support video resolution 1080P@60, 30,25,24Hz and 1080I@60,50Hz and more. Supports SMPTE 424M, SMPTE 292M, SMPTE 259M or DVB-ASI compliant With clock recovery, clock shaping Pass Pathological (extreme harsh environment) test Supports embedded digital...

Please take note that the product is customized type ,The lead time of production is 4-6 weeks, before you order ,please confirm to us if you accept this long production time.    Function: 4x 12G-SDI (forward direction, from TX to RX)-- Supports pathological code...

Feature: It is designed for multiple fibers protect mass fusion splices of ribbons with one to twelve fibers. The color is clear (transparent), it make it easy to detect splice before shrinkage, Easily use and avoid any damages to the optical fiber during installation This...

Product description This Ribbon type sleeves are applied in bar fiber-optic cables of the RIBBON type. They enable to secure up to twelve fibers in one sleeve. Excellent climatic and thermal properties make it ideal for use in closed as well as open spaces....

Description: the item is a universal Bidirectional RS-232 data over fiber optic extender. It is best choice for connecting a remote terminal unit (RTU) to a host (HOST) or a distributed data acquisition system (SCADA) controller. The product uses optical fiber as the transmission...

Feature: Extend your RS-485 data and Network: 1 bidirectional RS-485 + 1 Fast Ethernet (10/100 Mbit/s) port over same single mode or multimode fiber cable. Universal for Both Fiber Types: same media converters can supports single-mode fiber for a long distance up to 20...

Description: the unit is a RS-485 interface fiber MODEM with asynchronous transmission half-duplex transparent protocol, which is the best for connecting remote terminal unit (RTU) to host (HOST) or distributed data acquisition system (SCADA) controller select. The product uses optical fiber as the transmission...

Features Support 2 x RS-485 data (Correspond 1xRS422) and 1 x RS232 over a fiber optic cable simultaneously Suitable for Both Fiber Types (Single-mode and multimode). Single-mode fiber distance up to 20 km(12.4 miles), Multimode fiber distance up to 500m(0.31 miles). Adaptive single-mode fiber....

Feature: Between the APC optical fibers cables are connected or patched cords by a SC to SC APC fiber optic adapter sleeve through the interior adapter of the opening. SC female to female Fiber Optic Coupler Extender are suitable for Fiber Patch Panel Adapters, which...

Feature: Low Loss: The SC/UPC male to LC/FC/ST UPC female Adapter has a sleeve with Zirconia ceramics, provides high dimensional accuracy, reduces insertion loss, and prevents ESD damage Burning. LC Adapter: This fiber optic adaptor can be reused, high precision and good compatibility.Compact Design:...

  Type: SC/FC/LC/ST/ UPC APC Round is optional Insertion Loss Typical: ≤0.2dB; Return Loss: ≥50dB; repeatibility is less than 0.2dB Small loss and good reflection suppression Reusable, single / multi-mode fiber can be used ParameterInsertion Loss Typical: ≤0.2dB;Return Loss: ≥50dB;Exchangeability: ≤0.2dB;Repeatability: ≤0.2dB;Durability: >1000 times;Operating...

Feature： SC/UPC-LC/UPC, Duplex, Singlemode,OS2, the fiber outer diameter is 3.0mm. Compatible with all standard fiber optic equipment and connectors. Ceramic connectors ensure low signal loss, and high reliability. 15 years ISO certified manufacturer, assembly SFP transceiver, fiber patch cords, media converter and networking system....