12G/3G-SDI/Audio over Fiber Optic Converter LC/UPC Singlemode single fiber Up to 10Km Uncompressed No delay Broadcast grade high quality

Function:

1x12G-SDI (Forward direction, from TX to RX)

1x 3G-SDI (Reverse direction, from RX to TX)

2x Bidirectional analog audio with RCA interface

LC fiber connector, singlemode single fiber up to 10Km

Description:

This SDI over fiber converter can extend bidirectional SDI video signal over a fiber optic cable to far end, 1x12G-SDI is transmitted from T (TX) in the direction of R (RX), other 1x3G-SDI signal is transmitted in reverse direction. Single-Mode single Fiber transmission distances up to 10Km(6.2miles).

This SDI over fiber converter also can extend 2 channel of bidirectional Audio over same fiber optic cable to far end,  Audio is with RCA interface, Single-Mode single Fiber transmission distances up to 10Km(6.2miles).

The 12G-SDI ultra high definition audio and video optical transceiver is equipped with serial clock recovery, signal equalization, and line drive. The input automatically detects signals 12G-SDI/6G-SDI/3G-SDI/HD-SDI/SDI/SDI/ASI, which complies with the SMPTEST2082-1 (12GUHD-SDI), ST2081-1 (6GUHD-SDI), SMPTE424M, SMPTE292M, SMPTE259M, SMPTE297M, SMPTE305M, and SMPTE310M standards;

Support plug-in SFP optical modules, which can be replaced with corresponding optical modules at different distances or interfaces according to actual on-site needs;

Support single mode single fiber transmission distance of 10KM.

Real-Time Video Transmission for Exceptional Quality and Resolution

LED Status Provide Rapid Indication of Operating Parameters

No need to set up, plug and play.

3G-SDI Video:    

Physical Interface: BNC

Max Resolution: 1920 x 1080 @ 60Hz

Video Input and Output Impedance:   75Ω (unbalanced)

Video Input/output Voltage：Typical:1Vpp, Min 0.5Vpp, Max 1.5Vpp

Video Bits Rate: Max 2.97Gb/s

Video SDI standard: SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI.

Audio:

Physical Interface: RCA

Dynamic bandwidth:96dB

Total harmonic distortion (THD): -68dB

Signal-to-noise ratio: -68dB

Signal-to-noise ratio（S/N）: 60dB

Sampling frequency: 32kHz  44.1kHz  48kHz

Audio A/D sampling: 24 Bit

Frequency response: 10～20kHz

Gain mismatch between channels: 0.1dB

Gain error: ±5%

Gain drift: 100 ppm/°C

Amplitude-frequency characteristic: ≤±0.5 dB

Audio input/output impedance: 600 Ω balance

Audio maximum input/output voltage: 0~2V

Optical Interface:  LC (ST/SC/FC is optional, Contact us if needed)

Electrical & Mechanical :

1. Power supply: AC100-240V,DC5 (US/EU/UK/AU standard is optional)

2. Product weight: about 3Kg/Set.

Environmental    

1. Operating temperature: -20°C ~ +70°C

2. Storage temperature: -40°C ~ +85°C

3. Working humidity: 0% ~ 95% (non-condensing)

4. MTBF:>100,000 hours

Package Include:

1 x SDI over fiber Transmitter

1 x SDI over fiber Receiver

1 x 3M LC-LC S/M fiber patch cord

2x External power adapter

1x User Manual